Wooden Camera Guide

WC Gold Mount (DSMC1, DSMC2) - 167100

Updated on

Wooden Camera brand Gold Mount plate utilizing authentic Anton Bauer plate and RED DSMC1/DSMC2 LEMO compatible connector.

8" cable exits the right side of the plate allowing easy insertion into the camera. The design allows minimal cable excess while still being able to reach additional modules when necessary.

We provide custom lengths up to 6ft available at the standard price. Additional lengths available as needed.

2x D-Tap ports for accessory power.

Mounting Options:
To mount the WC Gold Mount onto the back of the DSMC1/DSMC2 one of these items is required:

Quick Back v2 - A quick release plate that can attach to the back of the brain or any RED module

Fixed Back - A bolt-on battery mount that can only attach to the brain

For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).

Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.

PART PART # QUANTITY
QRC-C700 (replace from QRC-CION
QRC-C700 1
LEMO 1B Female 6 Plug
FGJ.1B.306.CWLD72Z 1
LEMO 1B Boot 6.5mm Black
GMA.1B.065.DN 1
pro plate foam main rev3 6.9 x 4.7 x 1.7"
40003 1
Pro Plate Tray & Sleeve 6.95x4.75x1.75"
5002 1
Cable, 4x20, 2x26AWG
CABLE, EPIC POWER 1
cable ties, 4in black
20986 1
Sr, M3 x 12mm Phillips pan
6833 4


0 Comments

Add your comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Previous Article Top Plate (C100, C300, C500) - 161200
Next Article WC V-Mount (DSMC1, DSMC2) - 167000