The UVF Mount LCD Kit attaches larger LCD monitors to cameras while keeping the horizon level. Three points of adjustment: 15mm tube clamp for tilt and distance to the camera, NATO thumbscrew (identified by red component) for positioning on NATO rail, and tension thumbscrew to adjust the tilt of LCD. Tool-less design allows quick installation and removal of LCD unit. Safety pin prevents accidental removal. UVF v2 Sled can also attach directly to any NATO-style rail.
15mm Tube Clamp portion attaches to two 1/4-20 screw holes spaced between 25mm and 36mm center to center. The pass-through holes and slots on the L bracket accommodates monitors with 1/4-20 holes on top or bottom. A small spacer piece is included for the LCDs with video connection ports and controls on the bottom.
NATO Arm length approximately 4"
PART | PART # | QUANTITY |
---|---|---|
vf clamp alt rev3 |
204 | .05 |
vf bot fric.rev2 |
11408 | 1 |
Sr, #6-32 x 3/8in Allen set |
6996 | 1 |
4x6x0.3mm shim (was Shim 4x6x0.3) |
14150 | 1 |
wide spring 10.rev3 |
12719 | 1 |
vf LCD main (L-bracket) rev 2 |
11202 | 1 |
vf LCD part (small piece) |
11201 | 1 |
uvf threaded rod (> rev2 needs 2 Plugs) |
11402 | 1 |
4x6x0.3mm shim (was Shim 4x6x0.3) |
14150 | 5 |
Thumbscrew Assy (M4 STD) Black |
164B-165 | 4 |
tiny set screw |
69 | 1 |
new thread pin rev3 |
13448 | 1 |
Sr, M4 x 14mm socket cap |
6395 | 1 |
uvf arm mid |
11404 | 1 |
allen_3/16 |
6210 | 1 |
vf clamp part (red) |
216 | 1 |
vf slant part.rev3 |
11409 | 1 |
vf friction.rev2 |
11407 | 1 |
vf cover plate (steel rev4) |
208 | 1 |
Sr, 1/4-20 x 3/8in socket cap |
4880 | 5 |
vf rod Plug rev4 |
11401 | 2 |
Sr, M2.5 x 6mm star flat |
19266 | 3 |
Sr, #6-32 x 1/2in Phillips flat |
1238 | 2 |
0 Comments
Add your comment