
Wooden Camera brand V-Mount plate utilizing authentic IDX plate and RED DSMC1/DSMC2 LEMO compatible connector.
8" cable exits the right side of the plate allowing easy insertion into the camera. The design allows minimal cable excess while still being able to reach additional modules when necessary.
We provide custom lengths up to 6ft available at the standard price. Additional lengths available as needed.
2x D-Tap ports for accessory power.
Mounting Options:
To mount the WC Gold Mount onto the back of the DSMC1/DSMC2 one of these items is required:
Quick Back v2 - A quick release plate that can attach to the back of the brain or any RED module
Fixed Back - A bolt-on battery mount that can only attach to the brain
For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.
PART | PART # | QUANTITY |
---|---|---|
Sr, M3 x 8mm Phillips pan |
6831 | 4 |
LEMO 1B Female 6 Plug |
FGJ.1B.306.CWLD72Z | 1 |
LEMO 1B Boot 6.5mm Black |
GMA.1B.065.DN | 1 |
pro plate foam main rev3 6.9 x 4.7 x 1.7" |
40003 | 1 |
Pro Plate Tray & Sleeve 6.95x4.75x1.75" |
5002 | 1 |
Cable, 4x20, 2x26AWG |
CABLE, EPIC POWER | 1 |
cable ties, 4in black |
20986 | 1 |
IDX V-Mount (w/o D-Tap) |
P-V2-CIA | 1 |
64-1879 |
MAGNET, 1INCH | 1 |
576-0217010.HXP |
FUSE F10A | 1 |
PH3TX2 |
FUSE HOLDER, F-60-B | 1 |
DTAP-F body |
IDX 50030027 | 2 |
dtap female pin |
14370 | 4 |
0 Comments
Add your comment