E-Mount to PL Mount Pro (Sony FS7) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS7 camera. In our factory, we set the flange focus to match the Sony FS7; You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color-coded shims of various thicknesses. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with our Top Plate (Sony FS7), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter.

We also include a 1/4-20 Support Foot, that attaches to the bottom of the E-Mount to PL Mount, with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The support foot can also be attached to the Unified Baseplate (Sony FX9, FS7, FS7mkII) or (Sony FS5) using the vertical support hole and the Unified Lens Adapter Support Kit. PL Cap included preventing dust from entering the sensor area when the lens is not attached.

This adapter will also work with any E-Mount camera like the FS7mkII, FX9, A7, A7r, A7s, A7II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized.

Features:
- Support ring capable of integrating with Top Plate (Sony FS7)

Includes:
(2) 1/4-20x1/2" socket cap screws

Shim set (stackable to achieve necessary thickness)
Silver .0127mm (0.0005")
Amber .0254mm (0.001")
Purple .0381mm (0.0015")
Red .0508mm (0.002")
Green .0762mm (0.003")
Tan .1016mm (0.004")
Blue .127mm (0.005")