Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and a DC connector compatible with Sony PXW-FS7, FS7mkII, FS5, and Panasonic EVA1.
This model also works with Sony EX3 cameras.
Cable exits the right side of the plate allowing neat looping and insertion into the camera. Voltage regulator integrated in the plate provides constant 12V to camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
2x D-Tap ports for accessory power.
Cable length: 16 inches (406mm)
| PART | PART # | QUANTITY |
|---|---|---|
| Sr, M3 x 8mm Phillips pan |
6831 | 4 |
| IDX V-Mount (w/o D-Tap) |
P-V2-CIA |
1 |
| 576-0217010.HXP |
FUSE F10A |
1 |
| cable ties, 4in black |
ZIPTIE_4IN |
1 |
| Pro Plate Tray & Sleeve 6.95x4.75x1.75" |
5002 |
1 |
| pro plate foam main rev3 6.9 x 4.7 x 1.7" |
40003 |
1 |
| CableAssy, FS7 (EIAJ-4) |
CABLEASSY, FS7 |
1 |
| PH3TX2 |
FUSE HOLDER, F-60-B |
1 |
| DTAP-F body |
IDX 50030027 |
2 |
| dtap female pin |
14370 |
4 |
| DC-DC converter board rev2 |
16138 | 1 |
0 Comments
Add your comment